Categories

Categories

Additional Information

Additional Information

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Marshall Industrial Supplies

Categories

Categories

Allcon 10 Construction Adhesive 310ml

£9.00 (inc VAT) £7.50 (exc VAT)

Allcon 10 Construction Adhesive 310ml

£9.00 (inc VAT) £7.50 (exc VAT)
SKU:
ADAC10
Shipping:
Calculated at checkout
Current Stock:
40
Share

Product Description

Construction Adhesive

Tested according to WATT 91 DIN EN 204 D4, bonds nearly all materials, single component, easy handling, solvent-free, resistant to weather and aging, resistant to many chemicals, frost-proof, usable with natural stone
 

Benefits of use:

Use with standard caulking gun, can be put under stress after just 7 to 10 minutes, no primer required, replaces multiple other adhesives and glues, safe to use, always the right product to hand, opened cartridge can be used up to 10 months; unopened cartridge lasts up to 18 months, minimum wastage, can be painted and varnished, suitable for indoor and outdoor use
 

Areas of application:

Bonding of timber, chip and fibre boards, MDF, coated boards, metals, aluminium, natural or artificial stones, concrete, marble, ceramics, plastics, plasterboards, foam (EPS), hard foam, acrylic, insulation and much more

Curing approx. 3 mm Allcon 10 per 24 hours; approx. 70% surface bonding after 7 to 10 minutes; 100% cured after 30 to 45 minutes
Basis Moisture-curing polyurethane
Density approx. 1,4 g/cm³ (1400 oz/ft³)
Tested test report in accordance with DIN EN 204 D4 (waterproof gluing), according to WATT 91 (+80° C (+176° F))
Smell low odour
Storage life opened cartridge can be used for up to 10 months, unopened cartridge lasts for up to 1½ years
Skin formation time approx. 3 minutes under standard conditions (+23° C (+73.4° F) / 50% relative air humidity)
Storage dry, at room temperature
Gap bridging approx. 1,0 cm
Temperature resistant from -40°C (-40°F) to max. +80°C (+176°F) (short term: +120°C (+248°F))
Processable from +5° C (+41° F) to max. +40° C (+104° F)
Viscosity pasty

Find Similar Products by Category

Related Products