Description
The fischer bolt anchor FAZ II stainless steel is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the steel anchor. Due to simple mounting, the FAZ II stainless steel can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The stainless steel version is used to fix loads in outdoor areas. The steel anchor is, for example, suitable for fixing railings, consoles, steel constructions, and gates.
Advantages
- The FAZ ll tried and tested expansion clip enables the highest load bearing capacity. Thus fewer fixing points and smaller anchor plates are required.
- The reduced anchorage depth (new also for M8 version) allows for significantly reduced drill hole depths and reduces the number of reinforcement hits. This allows for a noticeably quicker installation.
- Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process.
- The international approvals guarantee maximum safety and the best performance. These approvals even cover the use in earthquake zones (seismic performance) or the use of hollow drills.
Applications
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Gates
- Façades
- Timber constructions
Versions
- zinc-plated steel
- stainless steel
- highly corrosion-resistant steel
Building materials
Approved for:
- Concrete C20/25 to C50/60, cracked
- Concrete C20/25 to C50/60, non-cracked
Also suitable for:
- Concrete C12/15
- Natural stone with dense structure
Advantages
- The FAZ ll tried and tested expansion clip enables the highest load bearing capacity. Thus fewer fixing points and smaller anchor plates are required.
- The reduced anchorage depth allows for significantly reduced drill hole depths and reduces the number of reinforcement hits. This allows for a noticeably quicker installation.
- Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process.
- The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic C1 + C2). ICC approval only with standard embedment depth.
stainless steel A4
| Product Variant | Seismic-Approval | Drill hole diameterd0[mm] | Min. drill hole depth for through fixingsh2[mm] | Anchor lengthl[mm] | Max. usable length hef,max./hef,min.tfix[mm] | ThreadØ x length[mm] | Width across nutSW[mm] |
|---|---|---|---|---|---|---|---|
| FAZ II 8/10 A4Art.-No. 501396 | C1 | 8 | 65 | 75 | 10/20 | M 8 x 38 | 13 |
| FAZ II 8/30 A4Art.-No. 501399 | C1 | 8 | 85 | 95 | 30/40 | M 8 x 58 | 13 |
| FAZ II 8/50 A4Art.-No. 501401 | C1 | 8 | 105 | 115 | 50/60 | M 8 x 78 | 13 |
| FAZ II 10/10 A4Art.-No. 501403 | C1 / C2 | 10 | 85 | 95 | 10/30 | M 10 x 53 | 17 |
| FAZ II 10/20 A4Art.-No. 501406 | C1 / C2 | 10 | 95 | 105 | 20/40 | M 10 x 63 | 17 |
| FAZ II 10/30 A4Art.-No. 501407 | C1 / C2 | 10 | 105 | 115 | 30/50 | M 10 x 73 | 17 |
| FAZ II 10/50 A4Art.-No. 501409 | C1 / C2 | 10 | 125 | 135 | 50/70 | M 10 x 93 | 17 |
| FAZ II 10/70 A4Art.-No. 501410 | C1 / C2 | 10 | 145 | 155 | 70/90 | M 10 x 113 | 17 |
| FAZ II 10/100 A4Art.-No. 501411 | C1 / C2 | 10 | 175 | 185 | 100/120 | M 10 x 100 | 17 |
| FAZ II 10/160 A4Art.-No. 501412 | 10 | 235 | 245 | 160/180 | M 10 x 100 | 17 | |
| FAZ II 12/10 A4Art.-No. 501413 | C1 / C2 | 12 | 100 | 110 | 10/30 | M 12 x 61 | 19 |
| FAZ II 12/20 A4Art.-No. 501415 | C1 / C2 | 12 | 110 | 120 | 20/40 | M 12 x 71 | 19 |
| FAZ II 12/30 A4Art.-No. 501416 | C1 / C2 | 12 | 120 | 130 | 30/50 | M 12 x 81 | 19 |
| FAZ II 12/50 A4Art.-No. 501419 | C1 / C2 | 12 | 140 | 150 | 50/70 | M 12 x 101 | 19 |
| FAZ II 12/100 A4Art.-No. 501421 | C1 / C2 | 12 | 190 | 200 | 100/120 | M 12 x 151 | 19 |
| FAZ II 16/25 A4Art.-No. 501423 | C1 / C2 | 16 | 135 | 148 | 25/45 | M 16 x 84 | 24 |
| FAZ II 16/50 A4Art.-No. 501424 | C1 / C2 | 16 | 160 | 173 | 50/70 | M 16 x 109 | 24 |
| FAZ II 16/100 A4Art.-No. 501425 | C1 / C2 | 16 | 210 | 223 | 100/120 | M 16 x 159 | 24 |
| FAZ II 20/30 A4Art.-No. 501426 | C1 / C2 | 20 | 155 | 172 | 30/- | M 20 x 54 | 30 |
| FAZ II 20/60 A4Art.-No. 503183 | C1 / C2 | 20 | 185 | 202 | 60/- | M 20 x 84 | 30 |
| FAZ II 24/30 A4Art.-No. 501427 | C1 | 24 | 185 | 205 | 30/- | M 24 x 58 | 36 |
| FAZ II 24/60 A4Art.-No. 503184 | C1 | 24 | 215 | 235 | 60/- | M 24 x 88 | 36 |
