Categories
Categories
Brands
Brands
- Home
- Fixings & Fasteners
- Anchors
- Fischer Bolt anchor FAZ II (Highly Corrosion Resistant Steel) (Per Box)
Fischer Bolt anchor FAZ II (Highly Corrosion Resistant Steel) (Per Box)
£612.61 (inc VAT) £510.51 (exc VAT)
Fischer Bolt anchor FAZ II (Highly Corrosion Resistant Steel) (Per Box)
£612.61 (inc VAT) £510.51 (exc VAT)
Product Description
Applications
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Gates
- Façades
- Timber constructions
Versions
- highly corrosion-resistant steel
Building materials
Approved for:
- Concrete C20/25 to C50/60, cracked
- Concrete C20/25 to C50/60, non-cracked
Also suitable for:
- Concrete C12/15
- Natural stone with dense structure
Advantages
- The FAZ ll tried and tested expansion clip enables the highest load bearing capacity. Thus fewer fixing points and smaller anchor plates are required.
- The reduced anchorage depth allows for significantly reduced drill hole depths and reduces the number of reinforcement hits. This allows for a noticeably quicker installation.
- Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process.
- The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic C1 + C2). ICC approval only with standard embedment depth.
highly corrosion-resistant
Type | Art.-No. | Seismic-Approval | Drill hole diameter | Anchor length | Max. fixture thickness (standard) | Max. fixture thickness (reduced) |
---|---|---|---|---|---|---|
d0 | l | tfix | tfix | |||
[mm] | [mm] | [mm] | [mm] | |||
FAZ II 8/30 C | 501429 | C1 | 8 | 95 | 30 | |
FAZ II 10/10 C | 501430 | C1 | 10 | 95 | 10 | 30 |
FAZ II 12/30 C | 501431 | C1 | 12 | 130 | 30 | 50 |
FAZ II 16/25 C | 501432 | C1 | 16 | 148 | 25 | 45 |
FAZ II 16/50 C | 503187 | C1 | 16 | 173 | 50 | 70 |
Functioning
- The FAZ II is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
- When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall.
- The anchor is set in line with the approval once the preset installation torque is achieved.
- In the case of series installation, we recommend using the FABS anchor bolt setting tool.