Fischer Highbond Short Anchor FHB II-AS (Per Box)

The best performance in cracked concrete with the least installation effort

The fischer Highbond anchor FHB II-A S is a system component of the fischer Highbond-System FHB II. The force-controlled expanding composite anchor is ideal for fixing maximum loads in cracked and non-cracked concrete. The threaded rod can be used with approval either with the injection mortar FIS HB FIS HB or the resin capsules FHB II-P and FHB II-PF HIGH SPEED. The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances as well as thin concrete members. The low anchorage depth of the FHB II-A S reduces the drill and installation work. No drill hole cleaning is required for installation with the resin capsules. This allows a particularly economical and time-saving fixing.

• The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing.
• With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required.
• The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications.
• The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.

Permission

• ETA-05/0164
• ETA-05/0164
• DoP No. 0019 - EN
• DoP No. 0085 - EN
• DoP No. 0756-CPD-0081
• DoP: 0130
• Füllmengen FHB II-A S

Functioning

• The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
• With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt.
• The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
• When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
• When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.

Product Variant	Drill hole diameter[mm]	Drill hole depth[mm]	Anchor depth[mm]	Usable length fix[mm]	Thread	Width across nut[mm]	Amount Unit(s)
FHB II-A S M10 x 60/10Art.-No. 097072	10	75	60	10	M 10	17	10
FHB II-A S M10 x 60/100Art.-No. 097206	10	75	60	100	M 10	17	10
FHB II-A S M10 x 60/20Art.-No. 097073	10	75	60	20	M 10	17	10
FHB II-A S M10 x 60/60Art.-No. 097074	10	75	60	60	M 10	17	10
FHB II-A S M10 x 75/10Art.-No. 506884	10	90	75	10	M 10	17	10
FHB II-A S M10 x 75/100Art.-No. 506887	10	90	75	100	M 10	17	10
FHB II-A S M10 x 75/20Art.-No. 506885	10	90	75	20	M 10	17	10
FHB II-A S M10 x 75/60Art.-No. 506886	10	90	75	60	M 10	17	10
FHB II-A S M12 x 75/10Art.-No. 097257	12	90	75	10	M 12	19	10
FHB II-A S M12 x 75/100Art.-No. 097275	12	90	75	100	M 12	19	10
FHB II-A S M12 x 75/165Art.-No. 097280	12	90	75	165	M 12	19	10
FHB II-A S M12 x 75/25Art.-No. 097268	12	90	75	25	M 12	19	10
FHB II-A S M12 x 75/60Art.-No. 097274	12	90	75	60	M 12	19	10
FHB II-A S M16 x 95/100Art.-No. 097295	16	110	95	100	M 16	24	10
FHB II-A S M16 x 95/165Art.-No. 097296	16	110	95	165	M 16	24	10
FHB II-A S M16 x 95/30Art.-No. 097281	16	110	95	30	M 16	24	10
FHB II-A S M16 x 95/60Art.-No. 097286	16	110	95	60	M 16	24	10
FHB II-A S M20 x 170/50Art.-No. 506917	25	190	170	50	M 20	30	10
FHB II-A S M24 x 170/50Art.-No. 097297	25	190	170	50	M 24	36	4